Introduction
A clutch is a mechanical
component is used to transfer power from driver shaft to driven shaft at will
of operator. Clutch is very popular in automobile industry to starting of the
engine from rest and disconnecting the transmission for shifting gears.
Classification
The clutches are classified as follows
- Positive clutches
- Friction clutches
Positive clutches
Positive clutch transmit
power by rigid connection between driver and driven shaft by means of providing
jaws on it. These type of clutch is suitable for the applications where quick
and simple engagement and disengagement are required. For engagement, driver
and driven shaft must be unloaded condition and stationary or relatively slow synchronize speed.
Positive drive means no slip.
In Positive clutches there is no slipping during engagement.
In the absence of slip, there is no relative motion between driver and driven surfaces results no heat generation during engagement and disengagement.
Points to remember
- Positive clutch is small in size as compare to friction clutch for same power transmitting capacity.
- In-capable of slipping.
- The engaging clutch surfaces interlock to produce rigid joint they are suitable for situations requiring simple and rapid disconnection.
- The engaging surfaces are usually of jaw type.
- The jaws may be square jaw type or spiral jaw type.
- Designed empirically by considering compressive strength of the material used.
Advantages of Positive clutches
- Simple in design
- No slip occur during power transmission
- No heat generated during operation
- Compact in size and low cost.
- Life is more at slow speed
Disadvantages of Positive clutches
- Engagement is possible at very slow synchronize speed or stationary condition.
- Life is reduce at higher speed engagement
Types of Positive clutches
Application of Positive Clutches
Positive cluches are suitable for slow speed apllication where higher torque is required.
- Rolling Mill
- Power press
what is the advantage of spiral jaw clutch over squire jaw cluth
ReplyDelete